|
|
|
Measure
the length of your table. We will make this top
to your dimensions +/- 1/8 of an
inch.
You can measure right up to the edge of the
table to protect the wood, but can not have any
overhang. Overhanging edges tend to get hit and
could make the top slide a
bit.
Please make you measurements in inches
and fractions (for instance 48 3/4
inches)
|
|
|
|
Measure the width of your table, again with no
overhang.
|
Most pool tables have corners that
look similar to this. This is our standard
corner, and no pattern is needed. Enter
"standard corners" on the order
form. 
|
|
Some tables have beveled edges and slight
contours to the corners.
|
|
|
|
For this type you need to measure from
the beveled edges. This will protect the top
from accidental bumping. This allows you to use
our standard
corners.
|
|
|
|
If your corner is more contoured than this, you
can send us a corner pattern and we will custom
fit at no additional charge. It's pretty
easy!
Step one, place a piece of paper on the table
lining up the front and side with one edge, or
you can trace in the straight line of each
edge.
|
|
|
|
Step two, trace along the contour of the
corner. Put your name and order number on the
sketch and I'll send you a FAX number to send
it to.
|
|
|
